logo
Giá tốt.  trực tuyến

Chi tiết sản phẩm

Nhà > các sản phẩm >
ống vây thấp
>
ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

Tên thương hiệu: Yuhong
Số mẫu: ASTM A334 GR.1
MOQ: 100kg
Giá cả: có thể đàm phán
Chi tiết bao bì: Case-Wooden Case / Iron Case / Gói có nắp nhựa
Điều khoản thanh toán: L/C, T/T.
Thông tin chi tiết
Nguồn gốc:
Trung Quốc
Chứng nhận:
DNV, BV, PED, LR, ABS, TS, CCS
Loại ống vây:
Ống vây thấp, ống vây tích hợp
Ứng dụng:
Bộ trao đổi nhiệt, nồi hơi
Đặc điểm kỹ thuật:
ASME A334
Độ dày vây:
0,3mm
Loại ống:
Liền mạch
FPI:
19-27
Vật liệu:
GR.1
Ndt:
Ht, ect
Khả năng cung cấp:
1000 tấn/tháng
Làm nổi bật:

ASTM A334 Gr.1 alloy steel low fin tube

,

integral low fin tube for heat transfer

,

alloy steel enhanced heat transfer tube

Mô tả sản phẩm

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

 

Description:
Integral low fin tubes are produced by cold rolling the outer surface of a seamless tube to form uniform fins directly from the base material. Since the fins are an integral part of the tube wall (not added separately), this structure ensures excellent thermal conductivity, mechanical strength, and resistance to fin detachment.
ASTM A334 Grade 1 alloy steel integral fin tubes are designed for efficient heat transfer in low-temperature and moderate-pressure applications, such as air coolers, condensers, and heat exchangers used in petrochemical and power industries.

 

Materials:

  • Base Tube: Alloy Steel ASTM A334 Grade 1 (Seamless)

Key Advantages:

  • Fins are integral with tube wall — no risk of detachment

  • Excellent thermal contact and heat transfer performance

  • Good mechanical strength and pressure resistance

  • Suitable for low-temperature applications

  • Long service life and easy maintenance

Chemical Composition of ASTM A334 Grade 1

Element C Mn P S Si
Composition (%) ≤0.30 0.40–1.06 ≤0.025 ≤0.025 ≤0.10

 

Mechanical Properties of ASTM A334 Grade 1

Value / Property Tensile Strength Yield Strength Elongation
Unit MPa MPa %
Requirement ≥ 415 ≥ 240 ≥ 30

 

Comparison Between ASTM A179 and ASTM A334 Gr.1 Low Fin Tubes

Feature / Type A179 Low Fin Tube A334 Gr.1 Low Fin Tube
Material Carbon Steel Alloy Steel
Tensile Strength (MPa) ≥ 325 ≥ 415
Temperature Range Normal to moderate temperature Low temperature service
Corrosion Resistance Standard Better
Thermal Conductivity Higher Slightly lower
Typical Use Air coolers, condensers Low-temperature heat exchangers

 

 

Applications:

  • Air Cooled Heat Exchangers

  • Condensers

  • Low-temperature Heat Exchangers

  • Petrochemical and Power Generation Equipment

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer 0 

Xếp hạng & Đánh giá

Đánh giá chung

4.0
Dựa trên 50 đánh giá về nhà cung cấp này

Ảnh chụp nhanh về xếp hạng

Sau đây là phân phối của tất cả các xếp hạng
5 sao
33%
4 sao
33%
3 sao
33%
2 sao
0%
1 sao
0%

Tất cả các đánh giá

K
Kumar
India Nov 8.2025
No corrosion issues so far, though we're running below dew point carefully. Installation was straightforward—tube sheets lined up, ends clean, rolling into the header went smooth.
S
Salem
Oman Sep 24.2025
We checked a few before installation — wall thickness consistent, roundness good. Welded in without problems.
M
Marek
Poland Sep 5.2025
Heat transfer has been consistent since day one. Our outlet temperatures are steady, and the exchanger is performing exactly as we expected.